TMflow Software version: 1.76.6300 or above.
TM Robot Hardware version: All versions.
For the control box: #
The ventilation design of the control box aims to reduce the temperature during operation, but at the same time, it can also pump the dust and the oil gas in the surroundings into the control box. Please evaluate the site surroundings and protect the control box well, such as filling the air outlet with oil filter cotton or covering the whole machine with a protective cloth or protective devices for internal components contamination prevention. To set up the control box in a positive pressure if necessary.
For the robot: #
The robot shaft joint protective cover, the buttons, and the light indication ring are all made of non-corrosive materials. Using in a corrosive environment for a long time may damage the components. To keep the situation above from happening, please be sure to outfit the robot with protective clothing when using it in a corrosive environment.
Contact Techman or qualified agents to purchase or outfit the protective devices.
About the temperature： #
HW3.2 control box is designed to operate in environments ranging from 0°C to +50°C. The current temperature of the control box can be observed by the LCM. Please keep the operating environment ventilated and clean the inside of the control box and replace the air filter regularly. To keep the operating environment ventilated and clean, it is necessary to clean the inside of control box and replace the filter frequently.