Skip to content

Notice on the Power Supply during Installation

TMflow Software version: All versions.

TM Robot Hardware version: All versions.


Please use an individual and independent power source to install the robot to keep from the robot abnormality resulting from the unstable power supply. Refer to Control Box Power Interface in Hardware Installation Manual for the applicable power supply and the output power of the robot.

Please ensure each piece of equipment is grounded properly during the control box and the robot installation.  Failed to ground properly or not grounded may result in electrical leakage, electric shock hazards, and abnormal signals in EIH (Eye-In-Hand) cameras.


Powered by BetterDocs