|This section describes possible faults and recommended actions for each fault when the external device is connected abnormally.
|The Robot disconnected to the external camera, PC, communication connection device , the port position light is not bright or only the monochrome light (orange or green). note: Need to use the port beside USB port of robot.
|The following are possible symptoms about electric control box which cannot be connect to another equipment:
1)The connection wire for the robot & external devices is loose.
2)Incorrect Network IP address for external devices.
3)HMI’s IP address is different with External devices.
4)NIC driver abnormal
5)IPC or NIC abnormal
|Common error code