Skip to content

Item for Import/Export

Examples are valid for:
TMflow Software version: 1.76.6300 or above.
TM Robot Hardware version: All versions.
Note that older or newer software versions may have different results.


In Import/Export, users can import items from the flash drive or export items to the flash drive. The label of the flash drive must be TMROBOT. Insert the flash drive to the Control Box before using the function.

  • To use the Export function: Click the Export button at the top left, and then select the desired file in the Select file box. Click the item in this box to add the item to the Selected files box. After completing the new addition, click Export at the bottom right to start the Export procedure.
  • To use the Import function: Click on the Import button at the top left, select the robot of the data source in the flash drive from the robot list, and then select the desired data from the Select file box. Click an item in this box to add the item to the Selected files box. After completing the new addition, click Import at the bottom right to start the Import procedure.

 

Available data types to import or export:

  • Log
  • Hardware Record
  • Project
  • TCP
  • Command
  • Component
  • Point Base
  • Operation Space
  • Global Variable
  • Path
  • Motion Record
  • Modbus
  • F/T Sensor
  • Network Service
  • Text file
  • IODD Files
  • Ethernet Slave
  • Backup File
  • Leasing Backup 

Powered by BetterDocs