Skip to content

External devices connection error

Case description: This section describes possible faults and recommended actions for each fault when the external device is connected abnormally.
Result: The Robot disconnected to the external camera, PC, communication connection device , the port position light is not bright or only the monochrome light (orange or green). note: Need to use the port  beside USB port of robot.
Possible reason: The following are possible symptoms about electric control box which  cannot be connect to another equipment:

1)The connection wire for the robot & external devices is loose.

2)Incorrect Network IP address for external devices.

3)HMI’s IP address is different with External devices.

4)NIC driver abnormal

5)IPC or NIC abnormal

Common error code



Powered by BetterDocs