Skip to content

Techman Robot compatible protocols and example PLCs

Examples are valid for:

TMflow Software version: 1.82.6300 or above.

TM Robot Hardware version: All versions.

Note that older or newer software versions may have different results.

 

 

Techman Robot supports PLCs with communication protocols of RS-232, Ethernet, Modbus TCP/RTU (master & slave), PROFINET (optional), and EtherNet/IP (optional).

We provide examples of connection for each type of protocols, please see the following articles.

 

Modbus Protocol #

For hardware connection, please see the following article. Click HERE

To add I/O channels with external I/O device via Modbus TCP, please see the following article. Click HERE

Profinet I/O device #

Profinet is a protocol mostly used with Siemens PLCs, for hardware connection, please see the following article. Click HERE.

For a full introduction on sample connection steps and methods, please see the follow article. Click HERE

EtherNet/IP device #

For hardware connection, here we use Rockwell PLC (AB) as example, please see the following article. Click HERE.

To configure a Studio 5000 Logix Designer, please see the following article. Click HERE.

For a full introduction on sample connection steps and methods, please see the follow article. Click HERE

RS-232 #

RS-232 is also compatible to Techman Robot, for purchase details, please see the following article. Click HERE

 

EtherCAT for I/O device #

Currently Techman Robot is compatible with EtherCAT by connection for expanding I/O channels, please see the following article. Click HERE

 

Powered by BetterDocs