Magnet Gripper Unit for Collaborative Robots
・Attracts and holds heavy objects with a magnet.
・Compact, lightweight product with high gripping force due to magnetic force.
・Operate by simply connecting 1 air supply tube and an electrical wiring M8 connector.
・With the dedicated TMComponent, the operation is intuitive and it is possible to receive sensor
・Holds workpieces even when air is shut off.
|Bore size (mm)||25|
|Operating Pressure (MPa)||0.20-0.60|
|Proof of Pressure (MPa)||0.9|
|Ambient and Fluid Temperature (Celcius)||-10-50|
|Holding Force (N)||Work-piece thickness (2mm)||160|
|Work-piece thickness (6mm)||200|
|Residual Holding Force (N)||0.3|
|Auto Switch Model||D-M9N|
|Standard Mounting Interface||ISO9409-1-31.5-4-M6|
|Connector Configurator||M8 8pin (Plug)|
HW: HW 1.0 and above
SW: SW 1.72 and above