OnRobot Dual Quick Changer
- Dual gripper speeds cycle time and can improve productivity by 50% or more.
- The new Dual Quick Changer enables you to use our end-of-arm tools together in a single cycle. With this innovative solution you can use two RG2 grippers or an RG6 gripper with a VG10 – it’s entirely up to you. Quickly and seamlessly switch between OnRobot tools to maximize the utilization of your robots with the Dual Quick Changer.
- The Dual Quick Changer has built-in electric feed-through for OnRobot tools. You can connect various tools. You can even use a Quick Changer Tool Side if you wish to use a non-OnRobot tool as well.
For software packages equal to or higher than SW 1.72, please find them accompanied with documents in OnRobot’s TM ROBOT support Page.
|Rated payload*||– –||– –||20*|
|Operating life (Tool change)||–||5.000||–||[cycles]|
|Operating life (Robot operation)||10||–||–||[M cycles]|
Please contact with OnRobot Official Website
Please notice the seller it’s “TM Plug&Play” when you purchase the package.