類別:
							Gripper_Vacuum						
				Robotiq
Vacuum Gripper EPick Extension Kit*
產品特色
Robotiq Vacuum Gripper可以處理各種應用,非常適合拾取由不同材料製成的不平整工件。 由於可定制的支架和獨特的空氣節點,Robotiq Vacuum Gripper為製造商提供了對其Gripper的完全控制,以確保它非常適合其應用。
*延伸套件讓您可使用 Robotiq 的真空夾具,在物料聚集的環境中拾取任何物件。20、40 和 60 cm 延伸管專門針對容器內取物應用而設計,為自動夾持任何形狀和尺寸的零件帶來了多種可能性。
										
							
										規格
						
											
										
							
										購買資訊
						
											
										
							
										相容性
						
									
							
							
							規格
			
			| Basic technical information | ||
| Parameters | Value | Units | 
| Weight | 710 | g | 
| Length | 62 | mm | 
| Width | 83 | mm | 
| Height | 102.3 | mm | 
| Operating ambient temperature | 5 to 40 | °C | 
| Humidity | 20-80 | %RH, non-condensing | 
| Vacuum level | 80 | % | 
| Vacuum flow | 12 | L/min | 
| Noise level | 64 | dB(A) | 
TM Gripper Component: VAC_V003_XXX
Extension Kit
- 3 x 20-cm G1/4 extension tubes
- 1 x adapter (G1/4 to G1/8)
- 1 x vacuum cup (1.5 bellows, 30 mm diameter)
- 1 x vacuum cup (1.5 bellows, 15 mm diameter)
Compatibility
HW: HW 1.0 and above
(for HW1.0/2.0, external 24V-2A power is needed and the device should be connected to robot controller directly)
SW: SW 1.68 and above
							
							
							購買資訊
			
			無資料
							
							
							相容性
			
			手臂型號
硬體
軟體





