Examples are valid for: TMflow Software version: WeldNode v1.0.0.62=>TMflow 2.14.7400 or later. WeldNode v2.0.0.x : 2.16.3500 or later . TM Robot Hardware version: HW3.2 / HW5.02(with TM12S-HW5.02 / TM12-HW3.2 in this article) Other specific requirements: Refer to Preparation section below. Note that older or newer software versions may have different results.   Goal This is … Continue reading Welding Node & Welding Application Guide on TMflow2