Vacuum Gripper Unit for Collaborative Robots
- All in one vacuum gripper unit driven by compressed air
- Operate by simply connecting one compressed air supply tube and an electrical wiring M8 connector.
- The wide variety of SMC (a pneumatics company) suction cup variations can apply to a wide range of picking applications.
- The adsorbing operation is intuitive and adsorbing detection works easily with sensor signals.
|Common||Mechanical interface standard||Compliant with “ISO9409-1-50-4-M6”|
|Operating temperature range [°C]||5 to 50|
|Weight [g]||856 ( without suction cups)|
|Max. workload [kg]||7|
|Air supply port(P)||One touch fitting (Φ6)|
|Power supply voltage [V]||DC24 ± 10%|
|Vacuum ejector||Max. vacuum pressure [kPa]||-84|
|Max. suction flow [L/min(ANR)]||17|
|Air consumption [L/min(ANR)]||57|
|Supply pressure range [MPa]||0.3 to 0.55|
|Standard supply pressure [MPa]||0.5|
|Pressure sensor||Rated pressure range [kPa]||0 to -101|
|Accuracy (Ambient temperature at 25°C)||±2 F.S. (with rated pressure range)|
|Linearity [%]||±0.4 F.S.|
|Repeatability [%]||±0.2 F.S.|
|Temperature characteristics [%]||±0.2 F.S. (Based on 25°C)|
|Applicable suction cups||Cup diameter 8 mm to 32 mm|
HW: HW 1.0 and above
SW: SW 1.72 and above
Please contact with SMC subsidiaries and authorized distribution partners
Please notice the seller it’s “TM Plug&Play” when you purchase the package.