NexCOBOT
TP-100-1 TM Kit

TP-100-1 for TM Plug&Play is handheld operating teach pendant and well integrated with TM Robot, users can use TP-100-1 to directly operate TM Robot.  TP-100-1 features an ergonomic housing with safety elements, 10.1” WXGA resolution Panel, and Multi-Touch P-Cap. The handheld control unit is the greatest comfortable to use and also supports left-hander.

Categories: ,

 

Technical Data TP-100-1 Technical Data TP-100-1
Panel – 10.1”, 16:10, WXGA, 1280 x 800

– Luminance: 500 cd/m2

– Contrast ratio: 800:1

– LCD color: 16.7M

– Viewing angle: 85 (U), 85 (D), 85 (L), 85 (R)

– Backlight: LED

Interface – Data back-up: 2 x USB 2.0

– Control connector: HDB-44 female

Removable HDB-44 control cable,  including power signal, E-stop button signal, Enabling switch signal, Switch button signal, STOP signal, USB 2.0 and VGA signals

Touch – Touch: 5 points P-Cap

– Touch light transmission: 87%

– Touch interface: USB

– Anti-scratch surface: 7H hardness

Ratings – Power supply voltage: 24 Vdc (19.2 to 28.8 Vdc)

– Current consumption:

> TP-100-VGA 0.625A at 24Vdc (max.)

Safety Elements – Emergency stop button (2 NC channels,

B10d=130,000)

> Contact function: latching

> Reset: by rotating

– 3-position Deadman switch

(3 channels 2 NO &1 NC, B10d=100,000)

Mechanical – Dimension: 297.3 x 257.2 x 57.2 mm

(78.5mm including E-stop button)

– Weight (without external control cable):

> TP-100-1 1.5Kg

– TP-100-1 IP protection class: Full IP65

– Junction Box module and “install on TM control box” IP protection class: Full IP 32

– Teach Pendant cable length: 3m

Operating Elements Switch button switch (1 NO, 1 NC)

6 membrane key

Environment – Operating temperature: 0°C to 50°C

– Storage temperature: -20°C to 75°C

– Operating humidity: 5%~90% relative humidity, non-condensing

– Vibration resistance/shock-proof/free-fall

according to EN 61131-2

System – TP-100-1: VGA input

– USB 2.0 upstream

Certifications – CE (Emission EN61000-6-4; Immunity EN61000-6-2 for installation in industrial environments)

– FCC Class A

Compatibility

TP-100-1 HW TP-100-1 SW TM Robot : HW TM Robot : Original SW
1.0 1.0.0.0 3.2 and above 1.76.6300 and above (note1)

Note1 : For factory SW1.76.6300~ 1.80.5300, display setting should be modify, please check with your TM local distributor before installing this device.

NO. Items Qty. Note
1 TP-100-1 1
2 EXTERNAL 3M CABLE WITH GROUNDING FOR TP-100-1 1 Content:
(1) 3M Cable*1
(2) M3 12mm screw*1
(3) Seal Washers*1
3 TP-100 Holders 1
4 TP-100-VGA-JB 1 Content:
(1) Junction box*1
(2) O-ring *1
(3) M3 12mm screw*4
(4) Cap *1
(5) Connector 2P*1
(6) Connector 3P*1
(7) Connector 6P*2
5 TP-100-VGA TM Plug&Play Accessory 1 Content:
(1) Metal Sheet *1
(2) Junction Wires *1
(3) R632 8mm screws *8

Availability: Global (Global, or only for certain regions)

Please contact with NexCOBOT  Official Website  

Please notice the seller it’s “TM Plug&Play” when you purchase the package.